Draw strength adjusting 1. Use the 7/32 folding wrench to adjust the adjusting screw, turn it clockwise to increase strength, turn it counterclockwise to decreace strength. 2. Turn the wrench around, the draw strength changes 3-5 pounds. 3. For safety, the screw should higher than the nut at least 1mm. 4. After adjusting, the upper and lower screw should be at a same level. Draw distance adjusting 1. Use the 1/8 folding wrench, release the adjusting screw of the wheel, turn the adjusting knob to the distance you need, then lock the screw. 2. The number on the knob of the upper and lower wheel should be the same.
1 X Compound Bow
© Nonnasyarncafe.com. All Rights Reserved